27 alloy wheels fit the Abarth 500 312 — fitment spec below.
17" Alloy wheels that fit the Abarth 500 312 (2008–2016)
GMP Italia Cartesio 17" Black Polished Alloy Wheels - 7J ET30 4x9817"£206.00
GMP Italia Cartesio 17" Gloss Black Alloy Wheels - 7J ET30 4x9817"£190.00
GMP Italia Raceway 17" White Alloy Wheels - 7J ET30 4x9817"£219.00
GMP Italia Raceway 17" Gloss Black Alloy Wheels - 7J ET30 4x9817"£210.00
GMP Italia Raceway 17" Gold Alloy Wheels - 7J ET30 4x9817"£228.00
MSW 85 17" Gloss Black Alloy Wheels - 7J ET30 4x9817"£154.00
MSW 85 17" Matt Graphite Alloy Wheels - 7J ET30 4x9817"£154.00
GMP Italia Astral 17" Black Polished Alloy Wheels - 7J ET35 4x9817"£176.00
GMP Italia Astral 17" Gloss Black Alloy Wheels - 7J ET35 4x9817"£158.00
OZ Racing ULTRALEGGERA 17" Grey Alloy Wheels - 7J ET35 4x9817"£360.00
OZ Racing ULTRALEGGERA 17" Matt Black Alloy Wheels - 7J ET35 4x9817"£360.00
Autec Zenit - -lackiert 17" Matt Grey Alloy Wheels - 7J ET35 4x9817"£140.00
Borbet BL4 17" Black Polished Alloy Wheels - 7J ET35 4x9817"£154.00
Borbet BL4 brillant 17" Silver Alloy Wheels - 7J ET35 4x9817"£136.00
Borbet N 17" Black Glossy Alloy Wheels - 7J ET35 4x9817"£213.00
Borbet N crystal 17" Silver Alloy Wheels - 7J ET35 4x9817"£210.00
Borbet RS brillant 17" Silver Alloy Wheels - 7J ET35 4x9817"£152.00
Ronal R42 kristallsilber 17" Silver Alloy Wheels - 7J ET35 4x9817"£159.00
Ronal R57 MCR 17" Jetblack-red Spoke Alloy Wheels - 7J ET35 4x9817"£256.00
Ronal R57 17" Black-Front Polished Alloy Wheels - 7J ET35 4x9817"£235.00
Ronal R65 17" Cerium Grey Alloy Wheels - 7J ET35 4x9817"£204.00
Ronal R65 jetblack 17" Jetblack-Matt Alloy Wheels - 7J ET35 4x9817"£201.00
Ronal R65 17" Silver Alloy Wheels - 7J ET35 4x9817"£200.00
Alloy wheel fitment — Abarth 500 312 (2008–2016)
The Abarth 500 312 (2008–2016) takes wheels with PCD 4x98 and a hub centre bore of 58.1 mm. 27 wheels in the current catalogue fit this vehicle.
| PCD | 4x98 |
|---|---|
| Hub centre bore | 58.1 mm |
| Diameters | 16" (8), 17" (27) |
| Approved widths — front | 7.0", 8.0" |
| Approved widths — rear | 8.0" |
| Factory setup | Square |
| OE fixing seat | Cone (60° conical) seat |
| Accessories | Wheel nuts & bolts, locking kits, spigot rings |
Wheels with a centre bore larger than 58.1 mm are supplied with the correct spigot rings.
