1998–2010 · verified fitment
Alloy Wheels for the Saab 9-5 YS3G
- 843 wheels fit
- PCD 5x120
- 67.1 mm bore
- M14x1.5
Alloy wheels that fit the Saab 9-5 YS3G (1998–2010)
Page 18 of 22 — 843 matching wheels.
Velare VLR16 20" Diamond Black Machined Face Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR16 20" Platinum Grey Machined Face Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR16 20" Matt Graphite Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR16 20" Diamond Black Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR16 20" Satin Bronze Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR16 20" Iridium Silver Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR16 20" Onyx Black Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR17 20" Diamond Black Machined Face Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR17 20" Matt Graphite Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR17 20" Diamond Black Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR17 20" Satin Bronze Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR17 20" Onyx Black Alloy Wheels - 8.5J ET35 5x12020"£307.25
Velare VLR17 20" Iridium Silver Alloy Wheels - 8.5J ET35 5x12020"£307.25
Autec Nimah 20" Black Alloy Wheels - 8.5J ET35 5x12020"£288.00
Autec Rias titansilber 20" Titaniumsilver Matt Polished Alloy Wheels - 8.5J ET35 5x12020"£217.00
Borbet BLX 20" Black Polished Alloy Wheels - 8.5J ET35 5x12020"£355.00
Borbet BLX brillant 20" Silver Alloy Wheels - 8.5J ET35 5x12020"£346.00
Borbet GTX 20" Titanium Glossy Alloy Wheels - 8.5J ET35 5x12020"£264.00
Ronal R62 jetblack 20" Jetblack-Matt-Front Polished Alloy Wheels - 8.5J ET35 5x12020"£278.00
Riviera RV197 20" Matt Black Alloy Wheels - 8.5J ET35 5x12020"£222.50- Stuttgart ST8 20x8.5 5x120 ET35 Gloss Black20"£273.00
- Stuttgart ST8 20x8.5 5x120 ET35 Matt Gunmetal20"£273.00
Alloy wheel fitment — Saab 9-5 YS3G (1998–2010)
The Saab 9-5 YS3G (1998–2010) takes wheels with PCD 5x120 and a hub centre bore of 67.1 mm. 843 wheels in the current catalogue fit this vehicle.
| PCD | 5x120 |
|---|---|
| Hub centre bore | 67.1 mm |
| Diameters | 16" (41), 17" (102), 18" (229), 19" (219), 20" (242), 21" (25) |
| Approved widths — front | 6.5", 7.0", 7.5", 8.0", 8.5", 9.0", 9.5" |
| Approved widths — rear | 9.0" |
| Factory setup | Staggered |
| OE fixing seat | Tapered (60° conical) seat |
| Accessories | Wheel nuts & bolts, locking kits, spigot rings |
Wheels with a centre bore larger than 67.1 mm are supplied with the correct spigot rings.
