411 alloy wheels fit the Infiniti Qx30 Awd H15 — fitment spec below.
20" Alloy wheels that fit the Infiniti Qx30 Awd H15 (2016–2019)
Page 11 of 11 — 411 matching wheels.
Borbet BY 20" Sterling Silver Alloy Wheels - 9J ET45 5x11220" · fits with 8 mm spacers£365.00
1Form Edition.1 (EDT.1) 20" Gloss Black Alloy Wheels - 9J ET45 5xBLANK20" · fits with 8 mm spacers£277.50
1Form Edition.1 (EDT.1) 20" Silver Alloy Wheels - 9J ET45 5x11220" · fits with 8 mm spacers£290.00
Ronal RF1 Forged 20" Bronze Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,414.75
Ronal RF1 Forged jetblack 20" Jetblack-Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,414.75
Ronal RF1 Forged 20" Tremolite Metallic Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,414.75
Ronal RF1 REV-CRB 20" Bronze Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,397.25
Ronal RF1 REV-CRB jetblack 20" Jetblack-Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,397.25
Ronal RF1 REV-CRB 20" Tremolite Metallic Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,397.25
Ronal RF1 REV-CRM jetblack 20" Jetblack-Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,404.75
Ronal RF1 REV-CRR jetblack 20" Jetblack-Matt Alloy Wheels - 9J ET46 5x11220" · fits with 8 mm spacers£1,404.75
Alloy wheel fitment — Infiniti Qx30 Awd H15 (2016–2019)
The Infiniti Qx30 Awd H15 (2016–2019) takes wheels with PCD 5x112 and a hub centre bore of 66.6 mm. 411 wheels in the current catalogue fit this vehicle.
| PCD | 5x112 |
|---|---|
| Hub centre bore | 66.6 mm |
| Diameters | 17" (303), 18" (579), 19" (586), 20" (411), 21" (93) |
| Approved widths — front | 6.5", 7.0", 7.5", 8.0", 8.5", 9.0" |
| Factory setup | Square |
| OE fixing seat | Tapered (60° conical) seat |
| Accessories | Wheel nuts & bolts, locking kits, spigot rings |
Wheels marked "fits with spacers" bolt on using hub-centric spacers — spacers up to 5 mm are included free with the wheels; thicker spacers are charged.
Wheels with a centre bore larger than 66.6 mm are supplied with the correct spigot rings.
