1225 alloy wheels fit the Ford Focus (IV) — fitment spec below.
Alloy wheels that fit the Ford Focus (IV) (1998–2025)
Page 31 of 31 — 1225 matching wheels.
Antera A123 - 750KG 20" Gloss Black Alloy Wheels - 9J ET40 5x10820"£460.00
Antera A123 - 750KG 20" Silver Alloy Wheels - 9J ET40 5x10820"£460.00
OZ Racing ARES 20" Matt Black Alloy Wheels - 9J ET40 5x10820"£1,458.00
MSW 82 20" Black Polished Alloy Wheels - 9J ET40 5x10820"£265.00
SuperMetal Trident 20" Black Polished Alloy Wheels - 9J ET40 5x10820"£234.00
SuperMetal Trident 20" Grey Polished Alloy Wheels - 9J ET40 5x10820"£234.00
Autec Veron - -diamond-cut 20" Black-Matt-diamond-cut Alloy Wheels - 9J ET40 5x10820"£307.00
Borbet XA mistral anthracite 20" Grey Polished Alloy Wheels - 9J ET40 5x10820"£282.00
OZ Racing HYPER XT HLT 20" Grey Alloy Wheels - 9J ET42 5x10820"£758.00
OZ Racing HYPER XT HLT 20" Gloss Black Alloy Wheels - 9J ET42 5x10820"£669.00
OZ Racing ASPEN HLT 20" Matt Black Alloy Wheels - 9J ET43 5x10820"£275.00
Autec Astana 20" Black Polished Alloy Wheels - 9J ET43 5x10820"£336.00
Autec Uteca 20" Black Alloy Wheels - 9J ET43 5x10820"£325.00
Autec Uteca 20" Black Polished Alloy Wheels - 9J ET43 5x10820"£341.00
Autec Uteca titansilber 20" Titaniumsilver Alloy Wheels - 9J ET43 5x10820"£319.00
GMP Italia Mentor Grey Polished20"£298.31
GMP Italia Mentor Black Polished20"£297.72
GMP Italia Mentor Gloss Black20"£282.14
Borbet BY 20" Titanium Polished Matt Alloy Wheels - 9J ET45 5x10820"£393.00
Borbet CW3 20" Black Glossy Alloy Wheels - 9J ET45 5x10820"£383.00
Borbet CW3 20" Sterling Silver Alloy Wheels - 9J ET45 5x10820"£355.00
1Form Edition.1 (EDT.1) 20" Gloss Black Alloy Wheels - 9J ET45 5xBLANK20"£277.50
CMS C25 Diamond Black Gloss 20"20"£308.00
CMS C33 Complete Black Gloss 20"20"£272.00
Autec Rixon 20" Black Polished Alloy Wheels - 9J ET53 5x10820"£332.00
Alloy wheel fitment — Ford Focus (IV) (1998–2025)
The Ford Focus (IV) (1998–2025) takes wheels with PCD 5x108 and a hub centre bore of 63.4 mm. 1225 wheels in the current catalogue fit this vehicle.
| PCD | 5x108 |
|---|---|
| Hub centre bore | 63.4 mm |
| Diameters | 16" (130), 17" (213), 18" (347), 19" (305), 20" (230) |
| Approved widths — front | 6.5", 7.0", 7.5", 8.0", 8.5", 9.0" |
| Factory setup | Square |
| OE fixing seat | Tapered (60° conical) seat |
| Accessories | Wheel nuts & bolts, locking kits, spigot rings |
Wheels with a centre bore larger than 63.4 mm are supplied with the correct spigot rings.
