656 alloy wheels fit the BMW 4 Series Gran Coupe G26 — fitment spec below.
19" Alloy wheels that fit the BMW 4 Series Gran Coupe G26 (2021–2024)
Page 17 of 17 — 656 matching wheels.
GMP Italia Qstar 19" Black Polished Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 10 mm spacers£248.00
GMP Italia Qstar 19" Gloss Black Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 10 mm spacers£223.00
GMP Italia Totale 19" Grey Polished Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 10 mm spacers£270.00
GMP Italia Totale 19" Black Polished Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 10 mm spacers£270.00
GMP Italia Totale 19" Gloss Black Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 10 mm spacers£242.00
GMP Italia Totale 19" Bronze Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 10 mm spacers£270.00
OZ Racing ASSETTO GARA 19" Bronze Alloy Wheels - 8J ET35 5x11219" · staggered pair · fits with 8 mm spacers£307.00
Sparco RECORD 19" Gloss Black Alloy Wheels - 8J ET38 5x11219" · staggered pair · fits with 12 mm spacers£272.00
Sparco RECORD 19" Grey Alloy Wheels - 8J ET38 5x11219" · staggered pair · fits with 12 mm spacers£234.00
OZ Racing ULTRALEGGERA HLT 19" Red Alloy Wheels - 8J ET41 5x11219" · staggered pair · fits with 15 mm spacers£696.00- OZ Racing ULTRALEGGERA HLT 19" Red Alloy Wheels - 8J ET41 5x11219" · staggered pair · fits with 15 mm spacers£696.00
GMP Italia Fender 19" Grey Polished Alloy Wheels - 8J ET50 5x11219" · staggered pair · fits with 25 mm spacers£255.00
GMP Italia Fender 19" Black Polished Alloy Wheels - 8J ET50 5x11219" · staggered pair · fits with 25 mm spacers£255.00
GMP Italia Fender 19" Gloss Black Alloy Wheels - 8J ET50 5x11219" · staggered pair · fits with 25 mm spacers£228.00
Alloy wheel fitment — BMW 4 Series Gran Coupe G26 (2021–2024)
The BMW 4 Series Gran Coupe G26 (2021–2024) takes wheels with PCD 5x112 and a hub centre bore of 66.6 mm. 656 wheels in the current catalogue fit this vehicle.
| PCD | 5x112 |
|---|---|
| Hub centre bore | 66.6 mm |
| Diameters | 17" (262), 18" (632), 19" (780), 20" (556), 21" (140) |
| Approved widths — front | 7.0", 7.5", 8.0" |
| Approved widths — rear | 8.0", 8.5", 9.0", 9.5" |
| Factory setup | Staggered |
| OE fixing seat | Tapered (60° conical) seat |
| Accessories | Wheel nuts & bolts, locking kits, spigot rings |
Wheels marked "fits with spacers" bolt on using hub-centric spacers — spacers up to 5 mm are included free with the wheels; thicker spacers are charged.
Wheels with a centre bore larger than 66.6 mm are supplied with the correct spigot rings.
