132 alloy wheels fit the Alpine A290 [2024-2026] — fitment spec below.
19" Alloy wheels that fit the Alpine A290 [2024-2026] (2024–2026)
Page 4 of 4 — 132 matching wheels.
Borbet BY 19" Titanium Polished Matt Alloy Wheels - 8.5J ET40 5x114.319"£365.00
Borbet CW3 19" Black Glossy Alloy Wheels - 8.5J ET40 5x114.319"£355.00
Borbet CW3 19" Sterling Silver Alloy Wheels - 8.5J ET40 5x114.319"£337.00
Borbet DB8GT2 19" Black Matt Alloy Wheels - 8.5J ET40 5x114.319"£374.00
Borbet DB8GT2 19" Black Matt Rim Red Alloy Wheels - 8.5J ET40 5x114.319"£383.00
Borbet DB8GT2 19" Bronze Matt Alloy Wheels - 8.5J ET40 5x114.319"£374.00
Borbet XA mistral anthracite 19" Grey Polished Alloy Wheels - 8.5J ET40 5x114.319"£254.00
Borbet Y 19" Black Glossy Alloy Wheels - 8.5J ET40 5x114.319"£296.00
Borbet Y crystal 19" Silver Alloy Wheels - 8.5J ET40 5x114.319"£287.00
Borbet Y 19" Titanium Matt Alloy Wheels - 8.5J ET40 5x114.319"£296.00
Ronal R68 19" Hyper Grey Alloy Wheels - 8.5J ET40 5x114.319"£289.00
Ronal R68 19" Jetblack Alloy Wheels - 8.5J ET40 5x114.319"£289.00
Alloy wheel fitment — Alpine A290 [2024-2026] (2024–2026)
The Alpine A290 [2024-2026] (2024–2026) takes wheels with PCD 5x114.3 and a hub centre bore of 66.1 mm. 132 wheels in the current catalogue fit this vehicle.
| PCD | 5x114.3 |
|---|---|
| Hub centre bore | 66.1 mm |
| Diameters | 19" (136), 20" (79), 21" (10) |
| Approved widths — front | 7.5", 8.0", 9.5" |
| Approved widths — rear | 8.5" |
| Factory setup | Staggered |
| OE fixing seat | Tapered (60° conical) seat |
| Accessories | Wheel nuts & bolts, locking kits, spigot rings |
Wheels with a centre bore larger than 66.1 mm are supplied with the correct spigot rings.
